HP WebQoS Software manual URL Encoding Parameters

Setup

WebQoS Configuration Files

The larger the value, the more tracing information is logged.

The trace files are located in the /var/opt/webqos/logs directory.

URL Encoding Parameters

The following parameters allow you to support users who have disabled cookies on their browser. These parameters are useful only if you are using an application server such as the BroadVision One-To-One

Server1. If you change any of these parameters, you must restart the SCA.

•APP_SESS_ENABLE_URL_ENCODING

Default: 0 (disabled)

Range: 0 (disabled), 1 (enabled), or 3 (dynamic enable)

Enable or disable URL encoding. If disabled, cookies are used to pass state information and users who have disabled cookies are not supported. If enabled, URLs are encoded to pass state information, users who have disabled cookies are supported, but the aggregate session count SLO is not useful. If set to 3, the application server you are using allows dynamic switching between cookies and URL encoding.

•APP_SESSION_ID_STR

No default.

The application server session identifier. How the application server uniquely identifies its sessions. For example, BroadVision uses the identifier BV_SessionID, so you would enter APP_SESSIONS_ID_STR BV_SessionID in the qos.conf file.

You must enable APP_SESS_ENABLE_URL_ENCODING to use this parameter.

1.The BroadVision One-To-One Server is a product of BroadVision, Inc.

Chapter 2 29