HP WebQoS Software manual Systems

Services, Sites, and Systems

Systems

1.Stop the SCA. Refer to “Restarting Individual WebQoS Components” on page 30 for more information.

2.If this is the only system running an SCA in your WebQoS domain, you must enable an SCA on another system in your WebQoS domain. You must have at least one SCA running in your WebQoS domain.

3.From the management console, highlight the system in the services/systems view area.

4.Select Actions: Delete -> System.

5.Verify that you want to delete the system.

If you use the setup script, run setup -ron that system. Make sure that you have at least one SCA and only one SCO running in your WebQoS domain.

NOTE The sites configured to the system are also deleted.

Chapter 5 83