HP WebQoS Software manual WebQoS setup Script Unix, Restarting Individual WebQoS Components

Setup

WebQoS setup Script (UNIX)

Restarting Individual WebQoS Components

In UNIX, if you have configured parameters in the qos.conf file after you have run the WebQoS setup script, you must restart (by stopping and starting) specific components (the SCA, SCI, and/or SCO).

In Windows, if you have configured parameters in the qos.conf file, you must restart specific components (the SCA, SCI, and/or SCO).

Restarting WebQoS Components (UNIX)

To restart the SCA, type the following:

/opt/webqos/bin/sca_stop /opt/webqos/bin/sca_start

To restart the SCI, type the following:

/opt/webqos/bin/sci_stop /opt/webqos/bin/sci_start

To restart the SCO, type the following:

/opt/webqos/bin/sco_stop /opt/webqos/bin/sco_start

Restarting WebQoS Components (Windows)

On a Windows NT system, to restart a WebQoS component, go to the Control Panel and select Services. Highlight the component you want to restart (WebQoS SCA, WebQoS SCI, or WebQoS SCO), click on the Stop button and then the Start button.

On a Windows 2000 system, to restart a WebQoS component, click on Start -> Programs -> Administrative Tools -> Services. Double-Click on the component you want to restart (WebQoS SCA, WebQoS SCI, or WebQoS SCO).

WebQoS setup Script (UNIX)

This utility enables and disables the WebQoS daemons and “qosifies” your web server. You run it after your web server is installed and after WebQoS is installed on systems running any WebQoS component or if

30 Chapter 2