Figure 49. Modify Part Properties window

vFrom a command line, type the following and press Enter. teamc part -modifyname -Buildername

where the part name is the name of the output ®le to be created by this builder and the builder name is the name of the builder itself.

The complete syntax for this command is described in the TeamConnection Commands Reference.

You can also attach a builder to an output ®le when the part is created.

After you attach a builder to a part, the builder is ready for action. When the part is built, the builder invokes the build script, which in turn invokes a tool to transform the inputs of the part into the output.

For more information about attaching builders to the build tree, refer to ªCreating the build tree for the applicationº on page 184.

Removing a builder from a part

If you no longer want to use a builder for a part, do one of the following:

vFrom the GUI, select Parts Modify Properties from the Actions menu of the TeamConnection Tasks window. On the Modify Part Properties window, type null in the Builder ®eld.

156User's Guide

Page 176
Image 176
IBM SC34-4499-03 manual Removing a builder from a part, Modify Part Properties window