IBM SC34-4499-03 manual Working with component and release processes

Verifying and testing part updates	60
Extracting a part	62
Checking out the part one more time	63
Checking the part back in	64
Freezing the work area	65
Refreshing the work area	66
Building the application	67
Integrating the work area	68
Closing a defect	69
Working in concurrent development	70
Refreshing the work area from the driver	71
Integrating the work area	72

Reconciling differences. . . . . . . . . . . . . . . . . . . . 73

Chapter 6. Working with component and release processes	77
Moving through design, size, and review	78
Changing defect ownership	79
Accepting a defect	80
Approving the ®x	81
Checking out a part	82
Checking in the changes	83
Freezing the work area	85
Building the application	86
Accepting ®x records	87
Integrating changed parts into a release	88
Adding a driver member	88
Reconciling the differences	89
Returning the work area to the ®x state	89
Reactivating the ®x record	90
Refreshing the work area	90
Refreshing the driver	91
Building the driver	92
Restricting the driver	93
Integrating the parts	94
Completing the driver	95
Testing the built application	96
Using a con®gured process	97
Retrieving a past version of a part	97

This section is for anyone who uses the TeamConnection client to do daily work. The information is meant for both the person who uses the command line interface and the person who uses the GUI; instructions for both are provided.

All the tasks in this part are done from a client machine.

Before reading this section, you should be familiar with the TeamConnection terminology and concepts presented in ªChapter 1. An introduction to TeamConnectionº on page 3.

16User's Guide