IBM SC34-4499-03 manual robot\src in the Destination directory eld, Accept Approval Records window

Figure 26. Accept Approval Records window

Command

From a command line, they both issue the following command for the approval record that they have:

teamc approval -accept -workarea 456 -release robot_control

Results

After both Linda and Sam accept the approval records, TeamConnection moves the work area to the ®x state.

Checking out a part

Now that the approval records have been accepted, Alex can check out the necessary parts. He decides that modi®cations are again required to the part optics.c. So, that is the part he checks out.

Alex must specify the work area on the check-out command so that the part is obtained from the defect's work area. He does one of the following:

GUI

From the GUI, he:

1.Selects Parts → Check out from the Actions pull-down menu on the Tasks window.

2.Types the following:

v optics.c in the Path names ®eld

vrobot_control in the Release ®eld

v456 in the Work area ®eld

vd:\robot\src in the Destination directory ®eld

3.Selects OK.

82User's Guide