Integrating changed parts into a release

The changes that Alex has made are now ready to be put into the next set of changes scheduled to be integrated with the release. This set of changes is known as a driver.

A driver named 0105 currently exists, and several driver members have already been added to the driver. Therefore, the driver is in the integrate state.

Adding a driver member

Carol, the project lead, adds work area 456 as a driver member of driver 0105:

GUI

From the GUI, she:

1.Selects Drivers Add driver members from the Actions pull-down menu on the Tasks window.

2.Types the following:

v0105 in the Driver ®eld

vrobot_control in the Release ®eld

v456 in the Work areas ®eld

3.Selects OK.

Figure 32. Add Driver Members window

Command

From a command line, she issues the following command:

teamc driverMember -create -driver 0105 -workarea 456 -release robot_control

Results

88User's Guide

Page 108
Image 108
IBM SC34-4499-03 manual Integrating changed parts into a release, Adding a driver member