IBM SC34-4499-03 manual Accepting a defect

Accepting a defect

When you accept a defect or feature, you accept the responsibility of resolving it. A defect or feature might require changes in more than one release. If the component includes the design, size, and review process, these releases were identi®ed during the size state, and TeamConnection created a work area for each identi®ed release. If the component does not include the design, size, and review process, you will need to create a work area manually.

When the ®rst work area moves to the complete state, the defect or feature automatically moves to the verify state or closed state.

Alex, now the owner of the defect, accepts the defect by doing one of the following:

GUI

From the GUI, he:

1.Selects Defects → Accept from the Actions pull-down menu on the Tasks window. The Accept Defects window appears.

Note: The Accept Defects window in this example may be different than one you may see based on your environment. Con®gurable ®elds may or may not be shown depending on any con®gurable ®elds set by you or your administrator,

2.Types 456 in the Defects ®eld and selectsprogram_defect from the Answer list.

3.Selects OK.

Figure 25. Accept Defects window

80User's Guide