Appendix D. Enabling an OS/2 Workframe project for TeamConnection

TeamConnection lets you create a Workframe version 3 project that has TeamConnection options as well as a set of TeamConnection actions. For each project, you specify on the Project Options window the values for these options. By doing this, you logically connect a Workframe project with a set of TeamConnection parts. This makes it easier for you to perform TeamConnection actions, such as checking parts in and out, directly from the Workframe.

Creating a TeamConnection-enabled Workframe project

Follow these steps to create a Workframe project that is enabled for TeamConnection.

1.On an OS/2 command line, type the following command and press Enter: fhotcini.cmd

This command creates a TeamConnection Project Smarts catalog on your desktop. (If you have already created this catalog, there is no need to perform this step again for additional projects.)

2.Open the TeamConnection Project Smarts catalog. Select the TeamConnection project, and select the Create pushbutton.

3.Specify the location for the TeamConnection project you want to create; then select OK.

When the action completes, you will see a TeamConnection Project on your desktop.

Setting up your project options

Options are provided so that you can set up each TeamConnection Workframe project. To set the options, do the following:

1.Select Tools Setup from the project's Views pull-down menu.

2.Select the Project Options or File Options menu from any of the TeamConnection actions.

The following options are provided:

Family The TeamConnection family.

Release

The TeamConnection release.

Work area

The TeamConnection work area in which you will perform TeamConnection actions.

© Copyright IBM Corp. 1992, 1995, 1996, 1997, 1998

241

Page 261
Image 261
IBM SC34-4499-03 manual Creating a TeamConnection-enabled Workframe project, Setting up your project options, 241