IBM SC34-4499-03 manual Putting a parser to work, Modify Part Properties window

3. Writes out the list of such ®les into the dependency list ®le

For example, for a C source ®le, the program could report a list of all the ®les included by the source ®le (using#include statements). For a COBOL program, COPY statements

would be the cue. TeamConnection ships a sample of a command ®le named fhbopars.cmd. It is written in REXX.

Putting a parser to work

For an application to use a parser, the parser must be attached to the TeamConnection parts that it will check for dependencies. Unlike a builder, a parser is attached to the input part rather than the output.

To attach a parser to a part, do one of the following:

vFrom the GUI, select Parts → Modify → Properties from the Actions menu of the TeamConnection Tasks window. On the Modify Part Properties window, type the name of the parser.

Figure 55. Modify Part Properties window

vAt a command prompt, type the following and press Enter:

teamc part -modify part -parser name -release name -family name

The complete syntax for this command is described in the Commands Reference.

You can also attach a parser to a part when the part is created.

178User's Guide