Intel ZT8101 user manual Product Safety Information, Safety Precautions

Agency Approvals

Product Safety Information

Safety Precautions

Review the following precautions to avoid injury and prevent damage to this product, or products to which it is connected. To avoid potential hazards, use the product only as specified.

Read all safety information provided in the component product user manuals and understand the precautions associated with safety symbols, written warnings, and cautions before accessing parts or locations within the unit.

Caution: To Avoid Electric Overload. To avoid electrical hazards (heat shock and/or fire hazard), do not make connections to terminals outside the range specified for that terminal.

See the product user manual for correct connections.

Caution: To Avoid the Risk of Electric Shock. When supplying power to the system, always make connections to a grounded main. Always use a power cable with a grounded plug (third grounding pin). Do not operate in wet, damp, or condensing conditions.

Caution: System Airflow Requirements. Platform components such as single board computers, Ethernet switches, etc., are designed to operate with external air flow.

Components can be destroyed if they are operated without external air flow. External air flow is normally provided by chassis fans when components are installed in compatible chassis.

Filler panels must be installed over unused chassis slots so that airflow requirements are met.

Refer to the product data sheet for airflow requirements if you are installing components in custom chassis.

Warning: Microprocessor Heatsinks May Become Hot During Normal Operation. To avoid burns, do not allow anything to touch processor heatsinks.

Caution: Do Not Operate Without Covers. To avoid electric shock or fire hazard, do not operate this product with any removed enclosure covers or panels.

Caution: Do Not Operate in an Explosive Atmosphere. To avoid injury, fire hazard, or explosion, do not operate this product in an explosive atmosphere.

Caution: If Your System Has Multiple Power Supply Sources. Disconnect all external power

connections before servicing.

Warning: Power Supplies Must Be Replaced by Qualified Service Personnel Only.

Caution: Lithium batteries are not field-replacable units. There is a danger of explosion if a battery is incorrectly replaced or handled. Do not disassemble or recharge the battery. Do not dispose of the battery in fire. When the battery is replaced, the same type or an equivalent type recommended by the manufacturer must be used. Used batteries must be disposed of according to the manufacturer’s instructions. Return the unit to Intel for battery service.

ZT8101 Users Guide 123