Intel ZT8101 user manual Main Menu, Using the Telnet Console, Basic Setup, Advanced Setup

Using the Telnet Console

Main Menu

The Main Menu has these options.

ZT8101 Switch ManagementLayer 3 Switch

-------------------------------------------------------------------------------

	Main Menu
Basic Setup:		Advanced Setup:
Switch Information		Spanning Tree
Basic Switch Setup		Forwarding
Serial Port Settings		IP Address Filtering
Port Configurations		MAC Address Priority
User Accounts		Mirroring Configurations
Network Management		VLAN Configurations
Switch Utilities		Link Aggregation
Network Monitoring		Layer 3 - IP Networking Setup
Save Changes	Logout	Reboot

*******************************************************************************

Function: Browse switch information. Message:

For Help, press F1

•Basic Setup

—Switch Information—Display information about the switch’s hardware and firmware.

—Basic Switch Setup—Configure the switch’s IP address.

—Serial Port Settings—Configure the switch’s serial port that is used for Telnet communication and terminal sessions.

—Port Configurations—Enable/disable individual ports and set their speed and duplex state.

—User Accounts—Set up user accounts, change their passwords, and modify their access rights.

—Network Management—Set up SNMP traps and community strings.

—Switch Utilities—View the history log, ping other devices, and manage firmware and configuration files.

—Network Monitoring—View various statistics by port or protocol and to view various routing tables.

•Advanced Setup

—Spanning Tree—Enable/disable the Spanning Tree Protocol (STP) for the switch and on individual ports.

—Forwarding—Reduce traffic congestion on the network by configuring MAC address aging, unicast packet forwarding, storm control, and static IP routes.

ZT8101 User’s Guide 45