
Using the Telnet Console
4. Use the spacebar to toggle these fields to the appropriate value.
Field | Description | |
|
| |
State | Enables or disables the currently selected ports. | |
|
| |
| Specifies the speed and full- or | |
Speed/Duplex | ports the choices are Auto, 10/Half, 10/Full, 100/Half, and 100/Full. For | |
| gigabit ports, the choices are Auto,1000/Full, and 100/Full. | |
|
| |
Flow Control | Specifies the flow control mode for the port. | |
|
| |
| Enables or disables dynamic learning of MAC addresses. You can disable | |
Learn | MAC learning to increase the security of a specific port. Such ports only | |
receive broadcast traffic and packets that have a destination MAC address | ||
| ||
| that matches the port’s MAC address. | |
|
|
5. Highlight APPLY and press Enter.
Switch Utilities
You can upgrade the switch’s firmware by transferring a new firmware file from an TFTP (Trivial File Transfer Protocol) server to the switch. You can also load a configuration file into the switch from an TFTP server or save the switch’s configuration file and a history log to an TFTP server.
The TFTP server must be running TFTP server software to perform the file transfer. TFTP server software is a part of many network management software packages, or can be obtained as a separate program.
The switch utilities also allow you to ping stations and to configure DNS relay and BOOTP/DHCP relay.
To access these utilities, from the Main Menu select Switch Utilities and press Enter.
Switch UtilitiesLayer 3 Switch
Switch Settings |
|
Server IP Address | : 10.40.44.60 |
Switch IP Address | : 10.90.90.90 |
Subnet Mask | : 255.0.0.0 |
Gateway Router | : 0.0.0.0 |
TFTP Services | Others |
Download Firmware from TFTP Server | Ping Test |
Download Configuration from TFTP Server | BOOTP/DHCP Relay |
Upload Settings to TFTP Server | DNS Relay |
Upload History Log to TFTP Server |
|
Upload History Log to TFTP Server |
|
*******************************************************************************
Function:
Message: |
|
|
CTRL+T = Main Menu | Esc = Previous screen | CTRL+R = Refresh |
ZT8101 User’s Guide | 53 |