Using the Web Console
Restart
1.To restart the switch, in the left panel click Reboot.
2.Click Yes to save the current switch configuration to
3.Click Restart.
Factory Reset
The Factory Reset option is used to restart the switch using only the configuration that was supplied by the factory. A factory reset returns all configuration options to their default values and restores the switch’s configuration to the factory settings.
All
To reset the switch to factory default values
1.In the left panel, click Factory Reset.
2.Click Yes if you want the switch to retain its current IP address, or No to reset the switch’s IP address to the factory default of 10.90.90.90.
3.Click Reboot.
Basic Settings
This section describes how to perform common monitoring and configuration tasks on the switch.
Condition | Task | |
|
| |
Using SNMP for network management | Configure the options in the Network Management | |
Setup screens. | ||
| ||
|
| |
Installing more than one switch | Use the Switch Utilities to save configurations for use | |
on multiple switches. | ||
| ||
|
| |
Testing communication with other devices | Use the Ping Test utility from the Switch Utilities | |
menu. | ||
| ||
|
| |
Need to set the port settings for the serial port to | Configure the options with the Serial Port Settings | |
values other than the default values | screen. | |
|
|
ZT8101 Users Guide | 87 |