Intel ZT8101 Basic Settings, Reboot, To save changes to NV-RAM, Using the Telnet Console

Using the Telnet Console

To save changes to NV-RAM

1.To retain any configuration changes permanently, from the Main Menu select Save Changes and press Enter.

2.Answer Yes to the confirmation prompt.

Reboot

1.From the Main Menu, select Reboot and press Enter.

2.Highlight one of these options and press Enter.

Option	Description
	Restarts the switch. Any configuration settings not
Reboot	saved using Save Changes from the Main Menu will
	be lost. The switch’s configuration will be restored to
	the last configuration saved in NV-RAM.
Save Configuration & Reboot	Saves the current configuration to NV-RAM (identical
	to using Save Changes) and then restarts the switch.
	Restarts the switch using the default factory
Reboot & Load Factory Default Configuration	configuration. All custom configuration data will be
	lost.
	Restarts the switch using the default factory
Reboot & Load Factory Default Configuration	configuration, except the user configured IP address
Except IP Address	will be retained. All other configuration data will be
	lost.

3. Highlight Yes on the confirmation prompt and press Enter.

Basic Settings

This section explains some of the basic options for configuring the switch.

Condition	Task
Using SNMP for network management.	Configure the options in the Network Management
	Setup screens.
Installing more than one switch.	Use the Switch Utilities to save configurations for use
	on multiple switches.
Testing communication with other devices.	Use the Ping Test utility from the Switch Utilities
	menu.
Need to set the port settings for the serial port to	Configure the options with the Serial Port Settings
values other than the default values.	screen.

48 ZT8101 User’s Guide