Intel ZT8101 user manual Switch Information

Using the Web Console

Switch Information

The Switch Information screen displays descriptive information about the switch.

In the left panel, click Switch Information. This screen contains the following information.

Field	Description
Device Type	Specifies the product name: ZT8101 Fast-Ethernet Switch.
MAC Address	Specifies the unique MAC address assigned to the switch. This address is not
	configurable.
Boot PROM Version	Specifies the version of the switch’s boot code.
Firmware Version	Specifies the version of the firmware installed on the switch. You can update this
	using a switch utility.
Hardware Version	Specifies the hardware version of the main board.
Device S/N	Specifies the serial number of the device.
Name	Specifies the name assigned to the switch system. If you are installing multiple
	switches, you should give each a unique name.
Location	Specifies the area or location where the switch resides.
Contact	Specifies the contact person for the switch.
Spanning Tree	Indicates whether STP is enabled or disabled.
GVRP	Indicates whether the Group VLAN Registration Protocol is enabled or disabled.
IGMP Snooping	Indicates whether the Internet Group Management Protocol Snooping is enabled
	or disabled.
RIP	Indicates whether the Routing Information Protocol is enabled or disabled.
PIM-DM	Indicates whether Protocol Independent Multicast - Dense Mode is enabled or
	disabled.
DVMRP	Indicates whether the Distance Vector Multicast Routing Protocol is enabled or
	disabled.

Basic Switch Setup

Use the Basic Switch Setup screen to set the boot-up option for obtaining an IP address or to manually assign an IP address for the switch.

1.In the left panel, click Basic Switch Setup.

This screen displays the current settings and allows you to configure these fields in the New Switch IP Settings form.

2.To configure the IP address, configure these fields.

Parameter	Default	Description
		Specifies the method for assigning the switch an IP address.
Get IP From	Manual	Use the drop-down menu to select Manual, DHCP, or
		BOOTP. (For more information about these options, see the
		descriptions below.)
IP Address	10.90.90.90	Specifies the IP address assigned to the switch.

88 ZT8101 Users Guide