Intel ZT8101 user manual To retain any configuration changes permanently, Saving Changes

Using the Web Console

The table summarizes the Admin and User privileges:

	Admin	User
Switch Configuration Management
Configuration	Yes	Read Only
Network Monitoring	Yes	Read Only
SNMP Community Strings and Trap Stations	Yes	Read Only
Update Firmware and Configuration Files	Yes	No
		Ping; Read Only access
Switch Utilities	Yes	to BOOTP/DHCP Relay
		and DNS Relay.
Factory Reset	Yes	No
Reboot Switch	Yes	No
Advanced Setup	Yes	Read Only
User Account Management
Add/Update/Delete User Accounts	Yes	No
View User Accounts	Yes	No

After establishing a User Account with Admin-level privileges, highlight Save Changes and press Enter. The switch will save any changes to its non-volatile RAM. You can now log in as that user and continue configuring the switch.

Saving Changes

The ZT8101 has two levels of memory; normal RAM and non-volatile or NV-RAM. Configuration changes are made effective when you click the Apply button. When you do this, the settings are immediately applied to the switching software in RAM and immediately take effect.

Some settings, though, require you to restart the switch before they will take effect. Restarting the switch erases all settings in RAM and reloads the stored settings from the NV-RAM. Thus, it is necessary to save all setting changes to NV-RAM before rebooting the switch.

To retain any configuration changes permanently

1.In the left panel, click Save Changes.

2.Click Save Configuration.

A message appears verifying that your new settings have been saved to NV-RAM.

Once the switch configuration settings have been saved to NV-RAM, they become the default settings for the switch. These settings will be used every time the switch is rebooted. You can use the Factory Reset option to return the switch to its factory configured settings.

86 ZT8101 Users Guide