Using the Telnet Console
To view the ARP table
1.From the Main Menu, select Network Monitoring ARP Table and press Enter.
2.Enter the IP interface name and the IP address, highlight FIND, and press Enter. The following information is displayed in the table.
Column | Description | |
|
| |
Interface | The IP interface name corresponding to the IP address. | |
|
| |
IP Address | The IP address that corresponds to the MAC address. | |
|
| |
MAC Address | The MAC address that corresponds to the IP address. | |
|
| |
Type | The method that was used to enter the IP address and MAC address pair | |
into the ARP table. The possible entries are Static, Dynamic, and Local. | ||
| ||
|
|
3.To delete an entry from the table, enter its information in the fields, highlight CLEAR, and press Enter.
Status
To view GVRP status
From the Main Menu, select Network Monitoring GVRP and press Enter. The GVRP Status screen contains the following information.
Field | Description | |
|
| |
Number of IEEE 802.1Q VLANs | The number of VLANs that have been defined for the | |
switch. | ||
| ||
|
| |
IEEE 802.1Q VLAN ID | The ID assigned to the currently displayed VLAN. | |
|
| |
Current Egress Ports | The ports in the VLAN that are egress ports. | |
|
| |
Current Untagged Ports | The ports in the VLAN that are untagged. | |
|
| |
| The status of the VLAN, whether it is a permanent | |
Status | definition or whether the ports dynamically joined the | |
| VLAN. | |
|
| |
Creation time since switch power up | The time the VLAN was created or last modified, | |
relative to when the switch was last booted. | ||
| ||
|
|
Note: If more than one IEEE 802.1Q VLAN has been defined for the switch, use CTRL+N to view the status of the other VLANs.
To view the router ports
Router ports can be either static or dynamic. Static ports are ports that you manually configure to route UDP multicast packets. Dynamic ports are added by the switch when the switch detects UDP multicast packets and IGMP multicast group membership reports on a port.
1.From the Main Menu, select Network Monitoring Router Ports and press Enter.
2.In the VLAN Name field, enter the name of the VLAN to search for router ports. Highlight FIND and press Enter.
ZT8101 User’s Guide | 61 |