Juniper Networks G10 CMTS manual Install an HFC Connector Module or SIM

Install an HFC Connector Module or SIM

Figure 32: DOCSIS Module Installation	•
	•
	•
	•
	•
	•
	•
	•
	•
2	•
	•
	•
	•
	•
	•
	•
	•
	•
	•
	•
	•
	•
	•
	•
	•
	•
	•
2	•
	•
	•
	•
	•
	•
	•
	•
Install an HFC Connector Module or SIM	•
	•
To install an HFC Connector Module or SIM, follow this procedure:	•
	•
1. If applicable, remove the air management panel from the slot by loosening the two	•
	•
self-contained screws at the top and bottom of each panel.
	•
2. Remove the module from its anti-static bag, being careful to avoid directly touching any	•
	•
component on the module. We recommend that you handle the module by by its card
	•
edges or ejectors.
	•
	•
	•
Unlike a DOCSIS Module, the ejectors on a rear module	•
	•
lock in the horizontal position (90° from the faceplate)
	•
when the module is properly installed into its card slot.
	•
	•
	•
	•
	•
	•
	•

Install the CMTS 105