Juniper Networks G10 CMTS manual Connect to Power Sources, AC Power Cord and Retainer Clip

Connect to Power Sources

•	4. Plug the male end of each 15 A power cord into independent power sources. Always use
•	AC power sources that support the ground prong of the power cord.
•
•
•		The G10 CMTS power supplies are autosensing which
•
		enables them for usage with 115 VAC or 230 VAC.
•
•
•
•
•

•Figure 38: AC Power Cord and Retainer Clip

•
•
•
•
•
•
•	Power Cord
•
	Retainer Clip
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

120 JUNOSg 3.0 G10 CMTS Hardware Guide