Juniper Networks G10 CMTS manual Docsis Module Removal

Module Removal

6. If the module will not be replaced, you must install an air management module in its		•
place. Tighten the two retainer screws on the air management module by applying 3		•
in-lb of torque to each screw.		•
		•
	You must install air management modules and air	•
		•
	management panels in all empty slots while operating the
		•
	G10 CMTS to ensure that proper air ventilation occurs
		•
	throughout the chassis, and to reduce EMI emissions.
		•
		•
		•
		•
Figure 47: DOCSIS Module Removal		•
		•
		•
		•
		•
		•
		•
		•
1	2	•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
	2	•
1		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•
		•

Replacement Procedures 167