Juniper Networks G10 CMTS manual Root@host-name#commit

Perform Initial Software Configuration

•	12. Optionally, configure additional properties by adding the necessary configuration
•	statements. Then, commit the changes to activate them on the CMTS.
•
•	[edit]
•	root@host-name#commit
•	13. When you have finished configuring the CMTS, exit configuration mode.
•
•	[edit]
•
	root@host-name#exit
•
	root@host-name>
•
•	The CMTS is now connected to the network but is not fully configured. You must perform
•
	additional configuration before the CMTS can pass traffic. For complete information about
•
	configuring the CMTS, including examples, see the JUNOSg software configuration guides.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

130 JUNOSg 3.0 G10 CMTS Hardware Guide