Juniper Networks G10 CMTS manual Cmts

Chassis

Figure 11: AC Power Supply Front Panel				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
		Input Range		•
				•
		100-240V
	200W Hot Swap			•
				•
				•
				•
				•
				•
				•
				•
				•
				•
A fully populated chassis requires a nominal 1500 watts from an external power source. The				•
				•
components of the chassis require 1000 watts (maximum) from the power supplies. The
				•
aggregate power output from all voltage levels is 200 watts per power supply. Other electrical
				•
characteristics are provided in Table 7 on page 28.
				•
				•
			The CMTS components do not consume their maximum	•
			power at the same time. Therefore, the CMTS maximum	•
			power requirement is less than the sum of the maximum	•
			power consumed by each component installed in the	•
			CMTS.	•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•
				•

Hardware Component Overview 27