Juniper Networks J6350, J4350 manual TIM518 Analog Telephony Interface Module

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

For more information about the TIM516, see the Avaya manual Hardware Description and Reference for Avaya Communication Manager.

TIM518 Analog Telephony Interface Module

The TIM518 Analog Telephony Interface Module (Figure 46 on page 78), also known as the TIM518 analog media module, has eight analog telephone lines and eight analog trunk lines.

Figure 46: TIM518 Analog Telephony Interface Module

Analog

ALM
ACT
TIM	51 8

1 —		8
LINES
17 —	24
LINES

g003867

NOTE: For analog direct inward dialing (DID) trunks, you can use all eight analog telephone lines.

You can configure eight TIM518 analog telephone lines as described in

Table 45 on page 78.

Table 45: TIM518 Possible Port Configurations

Possible Analog Telephone Port Configurations	Possible Analog Trunk Port Configurations
Wink-start or immed-start DID trunk	Loop-start or ground-start central office trunk with a loop
	current of 18 milliamperes (mA) to 120 mA
Analog tip/ring devices such as single-line telephones with or	Two-wire analog outgoing centralized automatic message
without LED message-waiting indication	accounting (CAMA) emergency E911 trunk, for connectivity
	to the PSTN

The TIM518 also provides the following features:

■Three ringer loads, the ringer equivalency number for up to 2,000 ft (610 m), for all 16 lines

■Up to 16 simultaneously ringing lines

■Type 1 caller ID and Type 2 caller ID for line lines

■Type 1 caller ID for trunk lines

■Ring voltage generation for a variety of international frequencies and cadences

78■ Avaya VoIP Modules