Juniper Networks J6350 Verifying Basic Connectivity, Displaying Basic Connectivity Configurations

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

Table 63: Configuring Basic Settings (continued)

Task	J-Web Configuration Editor
Define the IP address for	1.	In the configuration editor hierarchy, next to Interfaces,
ge-0/0/0.		click Configure or Edit.
	2.	In the Interface table, locate the ge-0/0/0row and click
		Unit.
	3.	In the Unit table, click 0, and in the Family section
		next to Inet, click Configure or Edit.
	4.	To delete the existing IP address, click the Discard
		button. Select the Delete Configuration Below This
		Point option button from the next display.
	5.	Next to Address, click Add new entry.
	6.	In the Source box, type the address and prefix length
		for the management interface—for example,
		192.168.1.1/24.
	7.	Click OK.

CLI Configuration Editor

1.Delete the existing IP address:

delete ge-0/0/0 unit 0 family inet address.

2.Set the IP address and prefix length of ge-0/0/0. For example:

set ge-0/0/0 unit 0 family inet address 192.168.1.1/24

Verifying Basic Connectivity

To verify that the Services Router has the settings you configured, perform the following task:

■Displaying Basic Connectivity Configurations on page 150

Displaying Basic Connectivity Configurations

Purpose Verify the configuration of basic connectivity. Because the basic connectivity settings appear in different places in the configuration hierarchy, displaying the entire configuration at once makes viewing the settings easier.

Action From the J-Web interface, select

Configuration>View and Edit>View Configuration Text. Alternatively, from configuration mode in the CLI, enter the show command. The following sample output displays the sample values configured in Table 63 on page 148. Your output displays the values you set.

[edit] user@host# show system {

host-name routera; domain-name lab.router.net;

domain-search [ lab.router.net router.net ]; backup-router 192.168.2.44; time-zone America/Los_Angeles; root-authentication {

ssh-rsa "ssh-rsa AAAAB3Nza...D9Y2gXF9ac==root@routera.lab.router.net";

}

name-server { 10.148.2.32;

150■ Verifying Basic Connectivity