Juniper Networks J6350, J4350 manual Configuring Basic Settings

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

3.If you are using the J-Web interface, click Commit to view a summary of your changes, then click OK to commit the configuration. If you are using the CLI, commit the configuration by entering the commit command.

4.To check the configuration, see Displaying Basic Connectivity Configurations on page 150.

Table 63: Configuring Basic Settings

Task	J-Web Configuration Editor
Navigate to the System	1.	In the J-Web interface, select Configuration>View
level in the configuration		and Edit> Edit Configuration.
hierarchy.	2.	Next to System, click Configure or Edit.
Define the hostname of	In the Host name box, type the hostname of the router—for
the router.	example, routera.
Name the domain in	In the Domain name box, type the domain name of the
which the router is	router—for example, lab.router.net.
located.
Allow SSH remote access.	1.	In the Nested configuration section, next to Services,
		click Configure or Edit.
	2.	Next to Ssh, click Configure or Edit.
	3.	Click OK.
	4.	Click OK a second time to return to the System level
		in the configuration editor hierarchy.

CLI Configuration Editor

From the [edit] hierarchy level, enter

edit system

Set the hostname. For example:

set host-name routera

Set the domain name. For example:

set domain-name lab.router.net

Set remote access for SSH:

set services ssh

Define root authentication for access to the router.

NOTE: For readability, the entire key is not shown.

Define the time zone the router is located in.

1.	In the Nested configuration section, next to Root	Set the root password. For
	authentication, click Configure or Edit.	example:
2.	Next to Ssh rsa, click Add New Entry.	set root-authentication ssh-rsa
3.	In the Authorized key box, type the RSA password—for	“ssh-rsa
	example, ssh-rsa AAAAB3Nza...D9Y2gXF9ac==	AAAAB3Nza...D9Y2gXF9ac==
	root@routera.lab.router.net	root@routera.lab.router.net”

4.Click OK.

5.Click OK a second time to return to the System level in the configuration editor hierarchy.

In the Time zone list, select the time zone for your	Set the time zone. For example:
router—for example, America/Los_Angeles.
	set time-zone America/Los_Angeles

148■ Configuring Basic Settings with a Configuration Editor