Juniper Networks J4350, J6350 manual About This Guide, Objectives, Audience

About This Guide

This preface provides the following guidelines for using the J2320, J2350, J4350, and

J6350 Services Router Getting Started Guide:

■Objectives on page xv

■Audience on page xv

■How to Use This Guide on page xvi

■Document Conventions on page xvii

■Related Juniper Networks Documentation on page xviii

■Documentation Feedback on page xxi

■Requesting Technical Support on page xxi

Objectives

This guide contains an overview, basic instructions, and specifications for J2320, J2350, J4350, and J6350 Services Routers. It explains how to prepare your site for installation, unpack and install a Services Router and its components, power on the router, install licenses, and establish basic connectivity.

J-series Services Router operations are controlled by the JUNOS software. You direct the JUNOS software through either a Web browser or a command-line interface (CLI).

NOTE: This guide documents Release 9.2 of the JUNOS software. For additional information about J-series Services Routers—either corrections to or omissions from this guide—see the J-series Services Router Release Notes at http://www.juniper.net.

Audience

This guide is designed for anyone who installs and sets up a J-series Services Router or prepares a site for Services Router installation. The guide is intended for the following audiences:

■Customers with technical knowledge of and experience with networks and the Internet

■Network administrators who install, configure, and manage Internet routers but are unfamiliar with the JUNOS software

Objectives ■ xv