Chapter 3: PIM and VoIP Module Overview

Table 32: LEDs for ADSL PIMs

Label

Color

State

Description

ONLINE

Green

On steadily

PIM passed the self-test and is online and

 

 

 

operational.

 

Unlit

Off

PIM is offline.

STATUS

Green

On steadily

Online with no alarms or failures.

 

Red

On steadily

Active with local or remote alarms. The router

 

 

 

has detected a failure.

For alarms, see the configuring and monitoring alarms information in the J-series Services Router Administration Guide.

G.SHDSL PIM

The G.SHDSL PIM (Figure 40 on page 65) provides symmetric high-speed digital subscriber line (SHDSL) physical interfaces to ATM network media types. The G.SHDSL PIM has two ports for ATM-over-SHDSL connections.

Figure 40: G.SHDSL PIM

The G.SHDSL PIM supports the following key features:

Onboard network processor

2-port two-wire mode and 1-port four-wire mode

Programmable line rates in both modes:

2-port two-wire mode supports autodetection of line rate and fixed line rates from 192 Kbps to 2.304 Mbps in 64-Kbps increments.

1-port four-wire mode supports fixed line rates from 384 Kbps to 4.608 Mbps in 128-Kbps increments.

32 virtual channels per PIM

ATM-over-G.SHDSL framing

“Dying gasp” notification

Field-Replaceable PIMs 65

Page 87
Image 87
Juniper Networks J4350, J6350 manual LEDs for Adsl PIMs, Shdsl PIM