Juniper Networks J6350, J4350 manual Gigabit Ethernet Port LEDs

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide

NOTE: High-speed slots are labeled with an E on the front-panel slot number diagram.

To install or remove a PIM, see “Replacing a PIM” on page 172.

Interface LEDs. The LINK and TX/RX LEDs indicate link status and activity.

Table 23 on page 54 describes the meaning of the LEDs.

Table 23: Gigabit Ethernet Port LEDs

Function	Color	State	Description
LINK	Green	On steadily	Port is online.
	Unlit	Off	Port is offline.
TX/RX	Green	Blinking	Port is transmitting or receiving traffic.
	Unlit	Off	Port might be online, but it is not
			receiving traffic.

For alarms, see the configuring and monitoring alarms information in the J-series Services Router Administration Guide.

Optical Interface Support. Table 24 on page 54 describes the optical interface support on the SFP Gigabit Ethernet ePIM over single-mode fiber-optic (SMF) and multimode fiber-optic (MMF) cables.

Table 24: Optical Interface Support for SFP Gigabit Ethernet ePIM

Parameter	1000Base-SX Transceiver	1000Base-LX Transceiver
Maximum distance	500 m (1640 ft) on 50/125-µm	10 km (6.2 mi) on 9/125-µm SMF
	MMF cable	cable
	200 m (656 ft) on 62.5/125-µm	550 m (1894 ft) on MMF cable
	MMF cable
Transmitter wavelength	830 nm through 860 nm	1270 nm through 1355 nm
Average launch power	–9.5 dBm through –4 dBm	For SMF cable: –9.5 dBm through
		–3 dBm
		For MMF cable: –11.5 dBm through
		–3 dBm
Receiver saturation	–3 dBm	–3 dBm
Receiver sensitivity	–18 dBm	–20.5 dBm

54■ Field-Replaceable PIMs