Juniper Networks J4350, J6350 manual User@host show chassis hardware

Chapter 10: Replacing Hardware Components

8.Press and release the power button to power on the router. Verify that the POWER LED lights steadily.

9.Verify that the Crypto Module is correctly installed by issuing the show chassis hardware command, as shown in the following example:

user@host> show chassis hardware
user@host> show chassis hardware
Hardware inventory:
Item	Version	Part number	Serial number	Description
Chassis			JN1092BAEADB	J6350
Midplane	REV 03	710-014593	NR2489
System IO	REV 01	710-016210	NL3304	JX350 System IO
Crypto Module				Crypto
Acceleration
Routing Engine	REV 08	710-015273	NM4265	RE-J6350-3400
FPC 0				FPC
PIC 0				4x GE Base PIC
FPC 6	REV 00	750-015152		FPC
PIC 0				6x GE SFP uPIM
Xcvr 0		NON-JNPR	PC14DP3	SFP-SX
Xcvr 2		NON-JNPR	PC21M3E	SFP-SX
Power Supply 0

If Crypto Module appears in the output, the Crypto Accelerator Module is installed correctly.

Replacing Crypto Accelerator Modules on J4350 and J6350 Routers

The Crypto Accelerator Module is a processor card that enhances performance of cryptographic algorithms used in IP security (IPSec) services. The Crypto Module is a standard feature on J6350 Services Routers and an optional feature on the J4350 Services Routers.

Figure 98 on page 202 shows the location of the Crypto Accelerator Module.

Replacing Crypto Accelerator Modules on J4350 and J6350 Routers ■ 201