Juniper Networks J4350 Managing J-series Licenses with the CLI, Adding New Licenses with the CLI

Chapter 9: Installing and Managing J-series Licenses

3.Select Save it to disk and specify the file to which the license keys are to be written.

4.Go on to “Verifying J-series License Management” on page 166.

Managing J-series Licenses with the CLI

To manage the J-series licenses with the CLI, perform the following tasks.

■Adding New Licenses with the CLI on page 165

■Deleting a License with the CLI on page 165

■Saving License Keys with the CLI on page 166

Adding New Licenses with the CLI

To add a new license key to the Services Router with the CLI:

1.Enter operational mode in the CLI.

2.Enter one of the following CLI commands:

■To add a license key from a file or URL, enter the following command, specifying the filename or the URL where the key is located:

request system license add filename url

■To add a license key from the terminal, enter the following command: request system license add terminal

3.When prompted, enter the license key, separating multiple license keys with a blank line.

If the license key you enter is invalid, an error is generated when you press Ctrl-D to exit license entry mode.

4.Go on to “Verifying J-series License Management” on page 166.

Deleting a License with the CLI

To delete a license key from the Services Router with the CLI:

1.Enter operational mode in the CLI.

2.Enter the following command for each license, specifying the license ID. You can delete only one license at a time.

request system license delete license-id

3.Go on to “Verifying J-series License Management” on page 166.

Managing J-series Licenses with the CLI ■ 165