Juniper Networks J4350, J6350 manual Displaying License Usage, Displaying Installed License Keys

Chapter 9: Installing and Managing J-series Licenses

■Each license is present. Licenses are listed in ascending alphanumeric order by license ID.

■The feature for each license is the expected feature. The features enabled are listed by license. An all-inclusive license has All features listed.

■All configured features have the required licenses installed. The Licenses needed column must show that no licenses are required.

■The expiration information for the license is correct. For J-series, only permanent licenses are supported.

Displaying License Usage

Purpose Verify that the licenses fully cover the feature configuration on the Services Router.

Action From the CLI, enter the show system license usage command.

user@router> show system license usage
	Licenses	Licenses	Licenses	Expiry
Feature name	used	installed	needed
j-flow	0	0	1
bgp-reflection	1	1	0	permanent

Meaning The output shows a list of the licenses installed on the Services Router and how they are used. Verify the following information:

■Each license is present. Features are listed in ascending alphabetical order by license name. The number of licenses is shown in the third column. Verify that the appropriate number of licenses are installed.

■The number of used licenses matches the number of configured features. If a licensed feature is configured, the feature is considered used. The sample output shows that the BGP route reflection feature is configured.

■A license is installed on the Services Router for each configured feature. For every feature configured that does not have a license, one license is needed.

For example, the sample output shows that the user has configured the J-Flow traffic analysis feature but has not purchased the license for it. An additional license is required to be in compliance with license agreements.

■The expiration information for the license is correct. For J-series, only permanent licenses are supported.

Displaying Installed License Keys

Purpose Verify the license keys installed on the Services Router.

Action From the CLI, enter the show system license keys command.

user@router> show system license keys

G03000002223 aeaqea qkjjhd ambrha 3tkqkc ayareb zicik6 nv6jck btlxao 2trfyq 65cdou r5tbbb xdarpg

Displaying License Usage ■ 167