JVC GZ-V500 manual Using the Silent Mode, Useful Settings for Recording, Zooming

Recording

Using the Silent Mode

When the Silent mode is used, the LCD monitor darkens and operation sounds will not be output. Use this mode to record quietly in dark places such as during a performance.

0Tappears when “SILENT MODE” is set to “ON”. “ SILENT MODE ” (A p. 136)

Useful Settings for Recording

0When “QUICK RESTART” is set to “ON”, this unit turns on immediately if you open the LCD monitor within 5 minutes after the power is turned off by closing the monitor.

“ QUICK RESTART ” (A p. 137)

0When “AUTO POWER OFF” is set to “ON”, this unit turns itself off automatically to conserve power when it is not operated for 5 minutes. (only when using the battery pack)

“ AUTO POWER OFF ” (A p. 137)

0When “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”, this unit detects faces and automatically adjusts its brightness and focus to record the faces more clearly.

“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 44)

0When “DATE/TIME RECORDING” is used, the date and time can be recorded together with the video.

“Recording Videos with Date and Time” (A p. 60)

Caution :

0Do not expose the lens to direct sunlight.

0Do not use this unit in the rain, snow, or places with high humidity like the bathroom.

0Do not use this unit in places subject to excessive humidity or dust, as well as places exposed to steam or smoke directly.

0While this unit may be used with the LCD monitor reversed and closed, the temperature rises more easily. Leave the LCD monitor open when using this unit in places exposed to direct sunlight or high temperatures.

0The power may turn off to protect the circuit if the temperature of this unit rises too much.

0Do not remove the battery pack, AC adapter, or SD card when the access lamp is lighted. The recorded data may become unreadable.

“ACCESS (Access) Lamp” (A p. 143)

0This unit is a microcomputer-controlled device. Electrostatic discharge, external noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such a case, turn off the power, then remove the AC adapter and battery pack. This unit will be reset.

0Make a backup of important recorded data.

-It is recommended to copy your important recorded data to a DVD or other recording media for storage.

-JVC will not be responsible for any lost data.

Memo :

0Check the remaining recording time in the media before you start shooting. If there is not enough space, move (copy) the data to a computer or disc.

0When there are many files in the media, it may take time for them to be displayed on the playback screen. Wait for a while as the access lamp appears blinking, which indicates normal operation.

0Do not forget to make copies after recording!

0Recording stops automatically as it cannot be performed for 12 or more consecutive hours according to specifications.

(It may take some time to resume recording.)

0For long recordings, the file is split into two or more files if the size exceeds 4 GB.

0You can connect this unit to the AC adapter to record for long hours indoors.

0Depending on the shooting conditions, the four corners of the screen may appear dark, but this is not a malfunction. In this case, change the shooting conditions by moving the zoom lever, etc.

Zooming

The angle of view can be adjusted using zoom.

0Use the W end (wide angle end) to shoot a wider field of view.

0Use the T end (telephoto end) to magnify the subject for shooting.

Wide Angle Telephoto

.

0The following zoom options are available:

-Optical Zoom (1 - 10x)

-Digital Zoom (11 – 200x)

0You can also use the zoom (T/W) button on the touch screen to zoom.

Zoom Button (T/W)

≪PLAY REC MENU

.

Memo :

0When digital zoom is used, the image becomes grainy as it is digitally enlarged.

0The zoom ratio range can be changed.

“ ZOOM ” (A p. 120)

Capturing Still Images During Video Recording

Still images can be captured by pressing the SNAPSHOT button while in the video mode (standby or recording).

.

0“PHOTO” lights up on the screen when a still image is being captured.

.

0The still images captured during video recording are saved to the destination set in “REC MEDIA FOR IMAGE”.

Memo :

0The size of the still image that is captured in the video mode is 1920 x 1080.

0Operation is invalid under the following conditions:

-when menu is being displayed

-when remaining recording time or battery power is being displayed

-when “TIME-LAPSE RECORDING” is in use

-when “FACE SUB-WINDOW” is set

-when “ANIMATION EFFECT” is set

-when “HIGH SPEED RECORDING” is set

-when “DECORATE FACE EFFECT” is set

-when “STAMP” is set

-when “HANDWRITING EFFECT” is set

-when “AUTO REC” is set

-when “DATE/TIME RECORDING” is set

24