Copying
Preparing a DVD Writer (CU-VD3)
1Remove the AC adapter and battery pack from this unit.
2 Connect the USB cable and the AC adapter.
To DC Connector
Preparing a DVD Writer (CU-VD50)
1Remove the AC adapter and battery pack from this unit.
2 Connect the USB cable and the AC adapter.
To USB Connector
To USB Connector
To DC Connector
3
AC Adapter To AC Outlet (110 V to 240 V)
DVD Writer
.
AConnect the USB cable of the DVD writer to this unit. B Connect the AC adapter of the DVD writer.
0Turn on the DVD writer.
C Connect the AC adapter to this unit.
0 Refer also to the instruction manual of the DVD writer.
3Open the LCD monitor.
.
0This unit turns on and the
0While the USB cable is connected, the
4Insert a new disc.
.
APress the eject button to open the disc tray.
BPull out the tray completely and load a new disc properly. C Push the disc tray in until it clicks into place.
Caution :
0Be sure to turn off the power when connecting the devices. Otherwise, electric shocks or malfunctions may occur.
1 | AC Adapter To AC | |
Outlet (110 V to 240 V) | ||
|
Protrusion DVD
.
AConnect the USB cable provided with the DVD writer. B Connect the AC adapter of the DVD writer.
0Turn on the DVD writer.
C Connect the AC adapter to this unit.
0 Refer also to the instruction manual of the DVD writer.
3Open the LCD monitor.
.
0This unit turns on and the
0While the USB cable is connected, the
4Insert a new disc.
.
APress the eject button. B Pull out the disc tray.
C Pull out the tray completely and load a new disc properly. D Push the disc tray in until it clicks into place.
Caution :
0Be sure to turn off the power when connecting the devices. Otherwise, electric shocks or malfunctions may occur.
Memo :
0All buttons on the DVD writer
84