.
STOP
SMILE
RECORD FRONT OF SMILING FACE
0Recording starts automatically. Using the smile % display as a
reference, smile such that the value is as high as possible.
0A sound can be heard when recording is complete.
0To cancel recording of smiling face and proceed to enter a name, tap
“STOP”, then tap “NO” and go to step 11.
11 Tap “OK”.
.
STOP
OK
ENTER A NAME
RECORDING COMPLETED
0Tapping “OK” registers the recorded face and the screen for entering
a name appears.
0To cancel the registration, tap “STOP”.
When “CANCEL FACE RECOGNITION?” appears, tap “YES” to
return to the normal recording mode.
12 Tap on the on-screen keyboard to enter a name, then tap “REG.”.
.
CANCELREG.
DELETE
0Tap “DELETE” to delete a character.
0Tap “CANCEL” to exit.
0Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0Tap E or F to move one space to the left or right.
0Up to 8 characters can be entered.
0How to input characters
Example: To enter “KEN”
Tap “JKL” 2 times F Tap “DEF” 2 times F Tap “MNO” 2 times
13 Tap the desired priority level, then tap “REG.”.
.
KEN
STOPREG.
TOUCH ORDER TO RECOGNIZE
0Upon registration, the last number is assigned as the priority level.
During face detection, the subject with the highest priority (lowest
number) will be detected.
0You can change the priority level of a subject by tapping on the
number.
Example: To change the priority level of number 3 to number 1, tap
number 1. The priority level of the registered subject becomes
number 1, while the priority levels of the original number 1 and the
ones below drop by one place. (In this example, the original number
1 becomes number 2, and the orignal number 2 becomes number 3.)
0When “REG.” is tapped, the registration complete screen appears.
.
OK
REGISTERED
0Tap “OK” to complete the registration.
0You can edit registered face information in “EDIT”.
“Editing the Registered Face Information” (A p. 52)
Memo :
0Faces may not be registered correctly in the following cases:
- when the face appears either too small or too large compared to the frame
- when it is too dark or too bright
- when the face appears horizontal or slanted
- when a part of the face is hidden
- when there are multiple faces within the frame
0To increase the accuracy of face recognition, fit only one face within the
frame and register in a bright environment.
0Faces may not be recognized correctly depending on the shooting
conditions and environment. In this case, register the face again.
0Faces may not be recognized correctly during recording if the face
recognition level is low. In this case, register the face again.
0Face tracking, face sub-window, and name display may not work properly
depending on the registered faces, shooting conditions (distance, angle,
brightness, etc.), and expressions.
0Face tracking, face sub-window, and name display may not work properly
for people with similar facial features, such as siblings, parents, children,
etc.
Recording
50