JVC GZ-V500 manual Recording Automatically by Sensing Movements Auto REC, Time-Lapse Setting

Recording

Time-Lapse Setting

The greater the number of seconds, the longer the recording interval.

Setting	Details
OFF	Deactivates the function.
1SEC INTERVAL	Takes a frame at 1-second intervals.
	Recorded videos will be played back at 30 times
	speed.
2SEC INTERVAL	Takes a frame at 2-second intervals.
	Recorded videos will be played back at 60 times
	speed.
5SEC INTERVAL	Takes a frame at 5-second intervals.
	Recorded videos will be played back at 150 times
	speed.
10SEC INTERVAL	Takes a frame at 10-second intervals.
	Recorded videos will be played back at 300 times
	speed.
20SEC INTERVAL	Takes a frame at 20-second intervals.
	Recorded videos will be played back at 600 times
	speed.
40SEC INTERVAL	Takes a frame at 40-second intervals.
	Recorded videos will be played back at 1 200 times
	speed.
80SEC INTERVAL	Takes a frame at 80-second intervals.
	Recorded videos will be played back at 2 400 times
	speed.

Caution :

0Audio cannot be recorded during time-lapse recording.

0Zooming, simultaneous still image recording, and image stabilizer are not available in time-lapse recording.

0When recording is stopped with the recorded time less than “0:00:00:17” , the video will not be saved.

Memo :

0Settings of time-lapse recording are reset when the power is turned off. To start time-lapse recording again, it is necessary to make the selection once more.

0Recording stops automatically 99 hours after it is started.

0Make use of a tripod and AC adapter for time-lapse recordings with long intervals.

It is also recommended to fix the focus and white balance manually.

“Tripod Mounting” (A p. 19) “Adjusting Focus Manually” (A p. 31) “Setting White Balance” (A p. 35)

Recording Automatically by Sensing Movements (AUTO REC)

This function enables the unit to record automatically by sensing the changes in subject’s movement (brightness) within the red frame displayed on the LCD monitor.

It can be set for both video and still image modes.

1Open the LCD monitor.

A

.

0Set the recording mode to either A video or B still image.

0To switch the mode between video and still image, tap Aor Bon the recording screen to display the mode switching screen.

Tap A or B to switch the mode to video or still image respectively.

2Compose the picture according to the subject. 0 Adjust the angle of view with the zoom, etc.

3Tap “MENU”.

≪PLAYREC MENU

.

0The shortcut menu appears.

4Tap “MENU” in the shortcut menu.

MENU

.

5Tap “AUTO REC”.

VIDEO

AUTO REC

.

0Tap 3or 2to move upward or downward for more selection.

0Tap L to exit the menu.

0Tap J to return to the previous screen.

6Tap “ON”.

56