Operation Buttons for Still Image Recording

.
[6630]
MENU
PLAY
Operation
Button
Description
AVideo/Still Image
Mode
Switches between video and still image
modes.
BT/W Zoom Allows the same functions as the zoom
lever to be performed.
Camera shake that often occurs when
using the zoom lever can be minimized.
“Zooming” (A p. 28)
CPlayback Mode Switches to the playback mode.
DSnapshot
Q
Functions as the SNAPSHOT button.
However, focus cannot be set by pressing
halfway.
EMENU Displays the various menus of still image
recording.
“Operating the Menu” (A p. 112)
FDisplay Button nSwitches the display between full (m) and
simple (n) with every tap of the button.
0Simple display: Some displays
disappear after approximately 3
seconds.
0Full display: Displays everything. The
display button changes from n to m.
0When the power is turned off, simple
display (n) will be set.
GRecording Mode
P/H
Switches the recording mode.

Using the Silent Mode

When the Silent mode is used, the LCD monitor darkens and operation
sounds will not be output. Use this mode to record quietly in dark places such
as during a performance.
0T appears when “SILENT MODE” is set to “ON”.
“ SILENT MODE ” (A p. 136)

Useful Settings for Recording

0When “QUICK RESTART” is set to “ON”, this unit turns on immediately if
you open the LCD monitor within 5 minutes after the power is turned off
by closing the monitor.
“ QUICK RESTART ” (A p. 137)
0When “AUTO POWER OFF” is set to “ON”, this unit turns itself off
automatically to conserve power when it is not operated for 5 minutes.
(only when using the battery pack)
“ AUTO POWER OFF ” (A p. 137)
0When “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”, this unit
detects faces and automatically adjusts its brightness and focus to record
the faces more clearly.
“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 44)

Caution :

0Do not expose the lens to direct sunlight.
0Do not use this unit in the rain, snow, or places with high humidity like the
bathroom.
0Do not use this unit in places subject to excessive humidity or dust, as well
as places exposed to steam or smoke directly.
0While this unit may be used with the LCD monitor reversed and closed,
the temperature rises more easily. Leave the LCD monitor open when
using this unit in places exposed to direct sunlight or high temperatures.
0The power may turn off to protect the circuit if the temperature of this unit
rises too much.
0Do not remove the battery pack, AC adapter, or SD card when the access
lamp is lighted. The recorded data may become unreadable.
“ACCESS (Access) Lamp” (A p. 143)
0This unit is a microcomputer-controlled device. Electrostatic discharge,
external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, turn off the power, then remove
the AC adapter and battery pack. This unit will be reset.

Memo :

0Before recording an important scene, it is recommended to conduct a trial
recording.
0The image stabilizer does not work when recording still images.
0Depending on the shooting conditions, the four corners of the screen may
appear dark, but this is not a malfunction. In this case, change the shooting
conditions by moving the zoom lever, etc.
Recording
27