D-10 A-61408 September 1995
11. Prime the ink cartridge by carefully inserting the end of a
paper clip into the hole at the end of the ink cartridge and
gently pushing in on the bladder. Allow a small amount of ink
to escape through the jets.
Ink Cartridge
Bladder (inside ink
cartridge)
12. Remove the paper clip and observe the ink flow back into the
bladder through the jets.
13. Use a dry, lint-free cloth to wipe the face and jets of the ink
cartridge.
14. Slide the ink cartridge back into the carriage.
15. Lower the holding bar back down to its original position.
16. If necessary, wipe the carriage clean with a dry, lint-free cloth.
17. Wipe the Front Document Printer Mounting Plate clean of any
ink deposits.
18. Place the Front Document Printer Carriage into the Front
Document Printer Mounting Plate.
19. Lower the Front Scan Module.
20. Latch the Front Scan Module by lowering the Front Scan
Module Release Bar.
21. Close the Lower Access Door.
22. Perform the Print Test Function.