C-8 A-61408 September 1995
8. Prepare the bar code to be evaluated by cutting around the
bar code so that only the vertical black and white bars
remain; cut away all text and surrounding marks or illustra-
tions.
NOTE: The bar code used must be of the type indicated in
the first line of the Status Display of the first page.
KODAK
MEMO
95-1-21
123SLG3B
KODAK
MEMO
95-1-21
123SLG3B
Document and
Surrounding Text
9. Use transparent adhesive tape to adhere the bar code to the
appropriate Imaging Guide in the proper direction. If the Bar
Code Reader is set to read data through the Front Scan
Module, adhere the bar code to the Front Imaging Guide and
ensure that the bar code is facing the Front Scan Module; if
the Bar Code Reader is set to read data through the Rear
Scan Module, adhere the bar code to the Rear Imaging Guide
and ensure that the bar code is facing the Rear Scan Module.
Bar Code (to
face to the
front of the
scanner)
Transparent
Adhesive Tape
Front Imaging Guide
(surface facing the
rear of the scanner)