A-61408 September 1995 B-5
Performing the Patch Test
Function (Future Function) Function Code F55 can be used to verify the operation and
position of the patch reader. No other accessories (document
printers, etc.) will be enabled during the test. In addition, no
imaging, Image Address changes, level counting, etc. will occur
during this test.
To perform a patch test:
1. Press the F Key.
2. Press the numeric key 5 twice.
3. Press Enter. A message will appear in the Status Display
which indicates that the patch test is being performed:
Patch Test or Feed Patch.
4. Feed a document to verify the operation and position of the
patch reader.
5. A message will appear in the Status Display indicating:
T-Patch, 2-Patch, 3-Patch, or Patch Not Read.