A-61408 September 1995 5-3
4. Lift up and latch the Horizontal Transport Plate into its open
position.
NOTE: If the Patch Reader Accessory is installed, the Patch
Reader must be removed from the mounting plate in order
to lift up the Horizontal Transport Plate.
5. Open the Side Access Door.
6. Release and open the Vertical Transport Plate by rotating the
release handle 180° clockwise.
Front Imaging
Guide (bottom
sits inside the
Transport Plate)
Front Imaging
Guide Thumb
Screw
Transport Plate
Holding Magnets
Rear Imaging
Guide Thumb
Tab
Rear Imaging
Guide (top sits
about 0.5 inch
(10 mm) from the
Vertical Transport
Plate)