3-2 A-61408 September 1995
Function Codes There are a number of functions available for use in the scanner
which can be used to temporarily change scanner operating
conditions and values, and to obtain system and accessory status
and information. These functions are selected using the function
keys on the Control Panel.
Using Function Codes To use the available functions:
1. Press the F key.
2. Press the numeric key(s) which correspond to the desired
Function Code.
3. Press Enter.
4. If the Function Code is used to enable/disable an option (turn
an option On/Off):
– Press the numeric key 1 to turn the option On (enable) or
press the numeric key 0 to turn the option Off (disable).
– Press Enter.
– or –
If the Function Code requires numeric input:
– Press numeric key(s) to enter the required value.
– Press Enter.
NOTE: The C key can be used to cancel a function before Enter
pressed in step 4.