2-6 A-61408 September 1995
Adjusting the Separator Roller
to Scan Thick Documents To scan very thick documents (card or cover stock), use the Gap
Release Lever to increase the gap between the feed roller and
separator roller to allow documents to be fed into the transport.
The Gap Release Lever is located on the front panel of the
scanner to the right of the Gap Adjustment Knob.
1. Press down and hold the Gap Release Lever. This opens the
gap between the feed and separator rollers and allows thick
documents to pass between them.
2. Manually feed the thick documents while holding down the
Gap Release Lever.