A-61408 September 1995 1-7
F (Function) Key
Used with numeric data and the Enter key to enter a function
code.
C (Clear, Cancel) Key
Used to clear error messages from the display. Also used to
cancel a function without changing the preset value(s).
Next
Allows operator to enter the next document Image Address.
Plus (+) Key
Used when inputting a new value for the Image Address. When
pressed, it allows a field to remain unchanged.
Enter
Used to enter numeric data for a Function Code or an Image
Address change.
Back (Backspace)
Used to move the cursor back one space during numeric data
input; the last data input is erased.
Cal
Used to start the calibration function.
End
Used at the end of a batch or job to stop the feeder and transport
system and to alert the host computer that the batch or job has
ended. When pressed, the documents in the transport system will
be scanned and stacked face down in the exit hopper before the
transport is disabled.
Jog
Used to momentarily turn on (jog) the transport system.
Level 3
Used to identify the next document fed into the scanner as a Level 3
document. This key includes an internal LED that illuminates green
when the next document image level to be assigned is Level 3.
Level 2
Used to identify the next document fed into the scanner as a Level 2
document. This key includes an internal LED that illuminates green
when the next document image level to be assigned is Level 2.