A-61408 September 1995 3-13
7. As you scan documents:
– Set the image level, as required.
– Periodically remove documents from the exit hopper.
NOTE: When the image buffer is full, the feeder will turn off, the
image buffer status LED illumination color will change to
red, and a short pause in scanning may occur as images
are being transferred to the host computer. The feeder will
turn on, the image buffer status LED illumination color will
change back to green, and scanning will resume auto-
matically.
8. Press Stop to disable the transport system after the last
document has been scanned or press End to alert the host
computer the batch or job has ended and to disable the
transport system after the last document has been scanned.
NOTE: If the Stop or End key is pressed while scanning a stack
of documents, the feeder will disable, but documents in
the transport system will be scanned and deposited face
down in the exit tray before the transport system is
disabled.
Manual Feed Method 1. Make sure you select the correct scanning operation condi-
tions and values.
2. Place the feed shelf in the up or down position—whatever is
most convenient.
3. Insert the documents one at a time.
NOTE: Ensure the documents are center-fed so each document
covers the 2.5-inch required width as indicated by the
label on the feed tray.
A3
A5
11 X 17"
A4
2.5"
8.5 X 11"
Feed Tray Label