1-8 A-61408 September 1995
Level 1
Used to identify the next document fed into the scanner as a Level 1
document. This key includes an internal LED that illuminates green
when the next document image level to be assigned is Level 1.
Run
Used to turn on the feeder and transport system.
Stop
Used to stop the feeder and transport system. Documents in the
transport system, when the Stop key is pressed, will be scanned
and placed in the exit hopper before the transport system stops.
Confirmation Tone/Alarm (located under the Control Panel)
The confirmation tone/alarm sounds when one of the following
conditions occur:
• Run key is pressed (one long tone).
• Stop or End key is pressed (many short tones followed by one
long tone).
• Feeder clutch engages/disengages (one short tone).
• Incorrect key input (three short tones).
• Document skew is greater than allowed skew parameter, or
when a document is shorter or longer than specified length
parameters (one short tone).
• Footswitch is pressed (one short tone).
• Bar Code detected (if accessory is enabled and option is setup
to alarm).
• Patch Code detected (if accessory is enabled and option is
setup to alarm).