A-61408 September 1995 6-3
Removing Documents 1. Check the transport system for documents lodged in the
document path.
2. Remove the jammed document(s) by using the procedures
listed below.
3. Press the Jog key to clear any remaining non-jammed
documents.
NOTE: Green colored handles and labels designate operator
accessible areas for maintenance and clearing the
document path.
Clearing a Jam in Area A Complete the following steps to clear the document path in Area
A. This area is comprised of the Feeder area.
1. Turn off the Power Switch.
2. Lift up the Lower Access Door.
CAUTION: For safety reasons the movement of the Lower
Access Door is intentionally slowed with a two-
way rotary damper. Open and close the door
slowly.
3. Raise the underlying Front Scan Module by lifting the release
bar.