A-61408 September 1995 A-1
Appendix A
Kodak Imagelink
Footswitch 500
The Footswitch 500 Accessory is designed to provide a hands-off
method of changing the Document Image Levels. An operator can
change the Image Level by simply pressing or releasing the
footswitch.
At installation, application modes are programmed for specific
applications. If the Footswitch 500 Accessory has been installed,
the application modes can be individually programmed to perform
one of the following Image Level changes:
Undefined: No change
Level 0: Assigns Level 0 to the next document
Level 1: Assigns Level 1 to the next document
Level 2: Assigns Level 2 to the next document
Level 3: Assigns Level 3 to the next document
Increment: Assigns the next higher level to the next
document (for pressed action only)
Function Codes The following function code is available if the Footswitch 500
Accessory has been installed and the current application mode
allows use of the Footswitch 500 Accessory.
F75 Footswitch Confirmation Tone On/Off
Follow these steps to turn the Footswitch Confirmation Tone
On/Off:
1. Press the F key.
2. Press the numeric key(s) which correspond to the Function
Code.
3. Press Enter.
NOTE: If the associated accessory is not installed, an Error
Message will be displayed.
4. Press the numeric key 1 to turn the function ON; or press the
numeric key 0 to turn the function OFF.
5. Press Enter. (Press C to cancel the function.)