A-61408 September 1995 5-9
4. Lift up and latch the Horizontal Transport Plate into its open
position.
NOTE: If the Patch Reader Accessory is installed, the Patch
Reader must be removed from the mounting plate in order
to lift up the Horizontal Transport Plate.
5. Vacuum the Lower Belt Module and Transport Belts.
WARNING:
Do not make contact with any electrical compo-
nents when vacuuming inside the scanner.
WARNUNG: Beim Staubsaugen innerhalb des Abtastgerätes
keine elektrischen Einzelteile berühren.
6. Release and lower the Horizontal Transport Plate back into its
original position.
7. Lower the release bar and latch the Front Scan Module into
its original position.
8. Close the Lower Access Door.