A-61408 September 1995 C-7
5. Open the Side Access Door.
NOTE: Do not leave the Side Access Door open more than 5
minutes.
6. Release and open the Vertical Transport Plate by rotating the
release handle 180° clockwise.
Front Imaging
Guide (bottom
sits inside the
Transport Plate)
Front Imaging
Guide Thumb
Screw
Transport Plate
Holding Magnets
Rear Imaging
Guide Thumb
Tab
Rear Imaging
Guide (top sits
about 0.5 inch
(10 mm) from the
Vertical Transport
Plate)
7. If the Bar Code Reader is set to read data through the Front
Scan Module, remove the Front Imaging Guide; if the Bar
Code Reader is set to read data through the Rear Scan
Module, remove the Rear Imaging Guide.
NOTE: Refer to
Section 5, Scanner Maintenance
(Cleaning
Imaging Guides) for details on how to remove the
Imaging Guides.